• Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News
Skip to content

3D Printer Project

  • Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News

3D Printer Project

"Design something that your imagination leads you to." ~ Ethan, Eastern Elementary Student

  • Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News

Category: Research

Hair, Bjork's Face, & Sundials - #3Dnuggets
Sep 11
Drea Weiner

Hair, Bjork’s Face, & Sundials – #3Dnuggets

Read More
3D Printing Our Future in Space and on Earth | Tommaso Ghidini
Jan 28
Drea Weiner

3D Printing Our Future in Space and on Earth | Tommaso Ghidini

Read More
Lisa Harouni: A primer on 3D printing
Jan 22
Drea Weiner

Lisa Harouni: A primer on 3D printing

Read More
Hard Plastic
Nov 2
Drea Weiner

Hard Plastic

Read More
3-D–Printed Flowers Lure Invasive Weevils to Their Deaths in Wisconsin
Aug 5
Drea Weiner

3-D–Printed Flowers Lure Invasive Weevils to Their Deaths in Wisconsin

Scientists at the Chicago Botanic Garden have designed and installed 3D printed flowers in northern Wisconsin to protect native thistles like Pitcher’s thistle. An invasive weevil, that was introduced to be a control for Canada thistle, is currently decimating native threatened species. The flower acts as a lures in and traps the weevil. Read more…

Read More
Zuyd University of Applied Sciences
Jul 25
Drea Weiner

Zuyd University of Applied Sciences

Read More
Roos Meerman, Aera Fabrica
Jul 22
Drea Weiner

Roos Meerman, Aera Fabrica

Read More
Footless Rooster
Jul 15
Drea Weiner

Footless Rooster

Read More
3D Printshow London 2015
Jul 5
Drea Weiner

3D Printshow London 2015

Read More
Liquid 3D printing explained
Jun 30
Drea Weiner

Liquid 3D printing explained

Read More
  • 1 of 2
  • 1
  • 2
  • Next »

Newsletter Registration:

Click Here

Check us out on

Facebook

Categories

  • Architecture
  • Art
  • Community Projects
  • Education
  • Engineering
  • Entertainment
  • Entrepreneur
  • Fashion
  • Food
  • Foreign Language
  • History
  • Hobby
  • Housing
  • Medical
  • Music
  • Pets
  • Research
  • Science
  • Technology
  • Tools
  • Traverse City
  • Uncategorized
  • World News/Events

Contact:

Drea Weiner, MiSTEM Network Director
Office: (231) 922-6560
Email: 3dprinterplc@gmail.com

Designed By InkHive. © 2021 3D Printer Project. All Rights Reserved.