• Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News
Skip to content

3D Printer Project

  • Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News

3D Printer Project

"Design something that your imagination leads you to." ~ Ethan, Eastern Elementary Student

  • Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News

Testing 3D Printed Drums for Marble Machine X

Posted on April 20, 2017 by Drea Weiner

Posted in Music

34 thoughts on “Testing 3D Printed Drums for Marble Machine X”

  1. Pingback: citalopram online pharmacy
  2. Pingback: cost of cephalexin 500 mg
  3. Pingback: ciprofloxacin online pharmacy
  4. Pingback: loratadine nz
  5. Pingback: how to purchase clindamycin
  6. Pingback: where can i buy clozapine 25 mg
  7. Pingback: prochlorperazine 5mg without prescription
  8. Pingback: carvedilol 3.12mg pills
  9. Pingback: warfarin online
  10. Pingback: divalproex 500 mg medication
  11. Pingback: trazodone 50mg pharmacy
  12. Pingback: tolterodine otc
  13. Pingback: acetazolamide purchase
  14. Pingback: order fluconazole
  15. Pingback: phenytoin 100 mg canada
  16. Pingback: cheap oxybutynin
  17. Pingback: how to buy doxycycline 100 mg
  18. Pingback: buy bisacodyl
  19. Pingback: venlafaxine 37.5mg canada
  20. Pingback: amitriptyline without a prescription
  21. Pingback: permethrin prices
  22. Pingback: erythromycin 250 mg united kingdom
  23. Pingback: estradiol 2mg otc
  24. Pingback: etodolac 400mg pills
  25. Pingback: alendronate 35mg otc
  26. Pingback: nitrofurantoin without prescription
  27. Pingback: glipizide 5 mg uk
  28. Pingback: how to purchase hydrochlorothiazide 5 mg
  29. Pingback: isosorbide 20mg australia
  30. Pingback: sumatriptan 50mg price
  31. Pingback: loperamide over the counter
  32. Pingback: azathioprine price
  33. Pingback: propranolol 10 mg nz
  34. Pingback: indomethacin for sale

Leave a Reply Cancel reply

You must be logged in to post a comment.

Newsletter Registration:

Click Here

Check us out on

Facebook

Categories

  • Architecture
  • Art
  • Community Projects
  • Education
  • Engineering
  • Entertainment
  • Entrepreneur
  • Fashion
  • Food
  • Foreign Language
  • History
  • Hobby
  • Housing
  • Medical
  • Music
  • Pets
  • Research
  • Science
  • Technology
  • Tools
  • Traverse City
  • Uncategorized
  • World News/Events

Contact:

Drea Weiner, MiSTEM Network Director
Office: (231) 922-6560
Email: 3dprinterplc@gmail.com

Designed By InkHive. © 2021 3D Printer Project. All Rights Reserved.