• Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News
Skip to content

3D Printer Project

  • Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News

3D Printer Project

"Design something that your imagination leads you to." ~ Ethan, Eastern Elementary Student

  • Welcome
  • About
  • Teachers
    • Getting Started
      • Athena
        • Athena .STL Part Files
      • da Vinci 1.0
        • Unboxing the da Vinci
        • Loading da Vinci Filament
        • Setup for Printing Your First Model
        • Print Bed Maintenance
        • Drive Belt Tension
        • Display Panel Trouble Shooting & Repair
        • Unclogging the Nozzle
        • da Vinci Calibration Fail Troubleshooting
        • da Vinci Advanced Settings: Layer Height
        • da Vinci Advanced Settings: Speed
        • da Vinci Advanced Settings: Support
        • da Vinci Advanced Settings: Shells
        • da Vinci Advanced Settings: Raft
        • Filament Replacement Instructions
      • MakerBot 2X
        • MakerBot Replicator 2X User Manual
        • Unboxing the MakerBot Replicator 2X
        • Start Up Process
        • MakerBot MakerWare
        • Loading the Filament
        • Leveling the Build Plate
        • Printing an Object
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Maintenance for the MakerBot Replicator 2X
        • Unclogging the Extruder
        • Unloading the Filament
      • MakerBot Mini
        • MakerBot Mini User Manual
        • Unboxing the MakerBot Mini
        • MakerBot Mini Setup
        • MakerBot MakerWare
        • Import 3D Models into MakerWare and Prepare for Printing
        • Watch the First Layer
        • Unclogging the Extruder
      • SeeMeCNC Eris
        • Eris: Unboxing & Setup
      • Ultimaker 2
        • Ultimaker 2 User Manual
        • Ultimaker 2 3D Printer Setup
        • Leveling the Build Plate
        • Changing Filament
        • Updating Firmware
        • Unblocking the Nozzle – The Atomic Method
        • Workflow
        • Panel Replacement
    • Software
      • Beginner
        • 3D Tin
        • Sketchup
          • Printing from SketchUp
        • Tinkercad
        • Tinkerplay
      • Intermediate
        • 123D Design
        • Blender
      • Advanced
        • Inventor
        • Solid Edge
        • SOLIDWORKS
    • Tips & Tricks
      • ABS vs. PLA
      • Finishing Acetone Wash Trick
      • Gluing: Making Your 3D-printed Objects Stick
      • Painting Your Prints
      • Printing from SketchUp
      • Use Acetone to Clean Build Plate
    • Resources
      • Additional Equipment
      • Additional Sites
      • Frequently Asked Questions
      • Lesson Plans
      • Museum/Institutional Resources
      • Print The Legend Documentary
      • Safety First
      • TCAPS Spark, a Mobile Makerspace
    • Professional Development
    • Help Me!
      • Contact Fellow Educators
  • Schools’ Prints
    • Grand Traverse Academy
    • The Pathfinder School
    • TBAISD
      • Career-Tech Center
      • Manufacturing Technology Academy
    • TCAPS
      • Cherry Knoll Elementary
      • Eastern Elementary
      • Silver Lake Elementary
      • Westwoods Elementary
      • West Middle School
      • Central High School
      • West Senior High School
  • Real World 3D Printing
  • News
    • 3D Printing Project News
    • World News

Making Of Pixar Lamp With LED And Switchbox

Posted on July 27, 2015July 27, 2015 by Drea Weiner

Posted in Art, Entertainment

30 thoughts on “Making Of Pixar Lamp With LED And Switchbox”

  1. Pingback: where to buy citalopram
  2. Pingback: cephalexin 500mg without a doctor prescription
  3. Pingback: ciprofloxacin 750mg over the counter
  4. Pingback: clindamycin 300mg online pharmacy
  5. Pingback: clozapine 25 mg coupon
  6. Pingback: prochlorperazine 5 mg coupon
  7. Pingback: carvedilolmg online
  8. Pingback: warfarin 1mg for sale
  9. Pingback: divalproex 250mg tablet
  10. Pingback: acetazolamide without a doctor prescription
  11. Pingback: fluconazole uk
  12. Pingback: phenytoin 100mg without a prescription
  13. Pingback: how to purchase oxybutynin 2.5 mg
  14. Pingback: order doxycycline 100mg
  15. Pingback: bisacodyl price
  16. Pingback: venlafaxinemg for sale
  17. Pingback: cost of amitriptyline
  18. Pingback: permethrin online
  19. Pingback: erythromycin online
  20. Pingback: estradiol 2 mg tablets
  21. Pingback: etodolac 400 mg pharmacy
  22. Pingback: alendronate online pharmacy
  23. Pingback: nitrofurantoin purchase
  24. Pingback: glipizide tablets
  25. Pingback: isosorbide 40 mg otc
  26. Pingback: buy sumatriptan
  27. Pingback: loperamide tablets
  28. Pingback: where to buy azathioprine 50mg
  29. Pingback: propranolol 10 mg nz
  30. Pingback: indomethacin 25mg tablet

Leave a Reply Cancel reply

You must be logged in to post a comment.

Newsletter Registration:

Click Here

Check us out on

Facebook

Categories

  • Architecture
  • Art
  • Community Projects
  • Education
  • Engineering
  • Entertainment
  • Entrepreneur
  • Fashion
  • Food
  • Foreign Language
  • History
  • Hobby
  • Housing
  • Medical
  • Music
  • Pets
  • Research
  • Science
  • Technology
  • Tools
  • Traverse City
  • Uncategorized
  • World News/Events

Contact:

Drea Weiner, MiSTEM Network Director
Office: (231) 922-6560
Email: 3dprinterplc@gmail.com

Designed By InkHive. © 2021 3D Printer Project. All Rights Reserved.